I have a few new user questions, that I haven’t been able to find the answer to elsewhere and don’t wish to bother Kemper support with. I trust the experienced amongst us will bear with me and my simple queries.
The Home Computer I use for downloading and updating etc. is in a different location from the Music Computer and Studio Gear, but they share the same building and internet router.
Can I install Rig Manager on the two separate computers, as I think it will be more convenient, helpful and easier to have Rig Manager on both, depending upon what I am doing?
When I first used the Kemper, I had to input a User Name into the device. As I was attempting to do so, and floundering a little, unfamiliar as I was with it, somehow the device suddenly accepted an incomplete name and moved on to the next stage.
Can I revisit and edit the incorrect name and exactly how would I do that, step by step?
I note that by design the Kemper utilises microphones dynamic mic types i.e. that there is no provision for phantom powered condenser mics. Although I have the ubiquitous SM 57 and I suppose my best dynamic mic is the SM7B, I would prefer to use one of my Neumann mics for profiling, when I eventually get round to that process.
Here's the thing. I have a couple of studio boxes specifically designed to provide 48 V phantom power for mics where no phantom power exists.
Can I use the Condenser Mics with 48V phantom power from the Studio boxes, using the line out from the Studio box into the Kemper, via the return XLR socket at the rear of the Kemper, without deleterious harm to the device?
Or is it just safer and better simply to use a dynamic mic?
Although the answers to these questions may seem obvious to many, I prefer to ask the questions and benefit from the experience of people more knowledgeable than myself.
Many Thanks in anticipation of any helpful replies!
