Have you any footage of this. I’m guessing it must be Epic ?
Have you any footage of this. I’m guessing it must be Epic ?
Kemper assumes all FX loops are mono.
If you send a loop a stereo signal it sums the two halves of the signal.
most pedals are mono, out/in
Using H9
If I set it before the Amp section, Kemper will sum it to mono.
If I set it after the Amp section it will keep the return stero.
You can run a H90 stereo in by using other inputs
I run mine mono separately into the kemper. Stereo out, unless I use the mono loop before the Amp section, the kemper will sum the stereo signal to mono.
If you using a comp, wawa or anything like that, which is what I use the H9 for, I place it before the Amp because they are mono efx,
I find when I back off around 7/8
The guitar is a little thicker in sound but I keep that nice strat tone. I bump my power sag to keep it alive
From Manual: ''When you turn “Power Sagging” beyond 50%, you go beyond what can be achieved with an analog tube amp, but without losing any of the natural characteristics of the sound. At full force, “Power Sagging” can make sparkling clean notes sound louder than distorted ones, so you can use it to expand the dynamic range of the original sound.''
I'm still on 9.0.5 lol but didn't think it'd be a Vox style amp, I mean if there's already one on there or one I can get off the factory rig packs I could try. It definitely sounds like a Fender sorta amp though and I've been through Twin/Reverb/Deluxe/Champion etc. Black Face sounds the closest.
I use a Ac15 profile with my strat
clean but breaks up really.
You could add a little spark with power sag. Basically the possibility are endless.
Try a VOX Ac15 profile. If you are on OS 10 try it with a LP of a Ac15.
I had this same problem but I can’t at this moment remember what I did.
I hook up my statue tomorrow and see what I did.
How are you connecting to your DAW
SPIDF, UBS AUDIO or XLR
can't remember what page but after the last update I had to output settings on the stage and some settings had either reset or change. After a few adjustments in the settings I was back in business.
There was a setting for DAW that was set to 0.
I looked up the specs on the Stage
SEND 1+2: ¼-inch TS unbalanced, output level: +4 dBu, output dynamic range: >108 dB
It depends on how you are running your setup.
With Guitar direct in, use instrument level
With the KP loop I would run it line in
Try both and compare the sound.
Line in gives me a cleaner sonic sound.
Feel free to ask me any questions you have hope I can help
But have fun with it
https://patchstorage.com is a great resource for presets
In dual mode, can each of the two effects be routed independently and in stereo? I guess this would require the kemper to run two stereo effects loop blocks (post-amp). Is that even possible?
Yes. If you put the H90 in duel mode you essentially have two EXs channel. The H90 has two sets of performances one set for single mode and the other for duel mode. The stage EXs inserts are mono in stereo out… the H90 can be run stereo in/out… but the stage only has mono in/stereo out for it's EXs loop inserts
I also set my H90 to run in line mode, not instrument.
The H90 can either run in single or dule mode. I run my H90 in single mode. In duel mode you can take advantage of two effects separately.
I run a H90 and a H9 into my stage.
Every program I've worked with has this protocol to sort files and folders, don't understand why this can't implemented within Rig Manager's code
Did you have your Kemper connected to your PC when you removed it from device manager.
I got the same problem after the last update.
change the title very misleading
Try one before and one after the stack. Also there’s a comp in the amp section crank that one too.
Try the Comp. In a loop
I don't thing they are stains. Looks more like a damaged display when something hits it.