When you have that you have to restart Kemper and Rig Manager, then it will work.
Sometimes you have to try 2 or 3 Times
When you have that you have to restart Kemper and Rig Manager, then it will work.
Sometimes you have to try 2 or 3 Times
hello... unknown
check when the kemper starts up or in the system screen
which software version on Kemper
use monitor cab off, dont switch the cab button off
try to disable the Kemper as a midi interface in Logic X
Hey Bert,
what means adj pr/tr for SC ?
treble and presence when using with Single Coils ??
Thanks for Help
RM auch geupdatet ??
i would like to suggest that everybody here takes a look at this Video from HW
"the version right before this has stable USB connectivity that required NO UPDATING"
Why then you use a Beta Version ?? and blame the Company???
Ok thats funny,
did the same procedure again via USB Stick, downgrade and upgrade
and now Bright Cap works
?????
Hey
have the same issue, tried to downgrade and upgrade via USB
Unfortunately it didn't changed anything
Bright Cap simply dont work in the latest Beta
Display MoreHi all !
This worked for me.
I *had* installed the latest BETA FW Update from within RM - *not* via USB Stick and as a result, the Bright Cap in RM 3.4.45 and on my Stage running the Latest BETA FW was "broken" / "not working"
The fix:-
1 => don't change or remove or uninstall RM 3.4.45 - leave it alone
2 => then put the previous BETA FW OS 10 10.0.0.46731 on a USB Stick - as normal - and *downgrade" from the Latest BETA FW back down to the previous BETA FW via the USB Port on your Unit - I have a Stage
3 => then put the latest BETA FW 10.1.xxxxx on a USB Stick - as normal - and "re-upgrade back up" to the Latest BETA FW via the USB Port on your Unit
Result
- RM 3.4.45 has remained installed - no changes
- Latest BETA FW 10.1.0.47341B is installed - all good
- Bright Cap Control in RM -and- on the Hardware unit are both working perfectly and are both talking to each other perfectly
Hope this helps.
Ben
Hey
have the same issue, tried to downgrade and upgrade via USB
Unfortunately it didn't changed anything
Bright Cap simply dont work in the latest Beta
I'm on Toaster(Head) Profiler, I have latest BETA FW 10.1.0.47341B installed by RM and for me Bright Cap Control in RM and on the Hardware worked correctly.
did you update through RM or via USB Stick
Display MoreI had entered a bug report on this, explaining that it has no audible effect from either Rig Manager or the Profiler direct editing.
I got a reply from Hans saying he was able to confirm and he would send it to the Kemper developers. The next reply was:
"I forwarded your findings to our developers and received the following response. The Bright Cap parameter works as intended but is best enjoyed with clean rigs. Please load the MB Plexi rig from the Michael Britt Liquid Profile rig pack and set the modeled gain to zero. You will hear the bright cap effect as it changes from zero to 10."
I verified that this does not work either and let them know. Haven't gotten any further response so far.
Bright dont work on any of the available Liquid Profiles with the new beta, not on Distorted nor in cleans, simply no function
You are right I was wrong. With both the new RM and new Beta FW .... Bright Cap on RM and direct on unit no longer does anything
Ben
Yes here's the same behavior, Bright Cap dont work in the New Beta anymore
I mean no PDF Files , you have to look in RM under The Comments Column for the Rig file you choose , in some cases the Settings are written down there
there are def some settings as example from tonejunkies has some in there it think 2018 Packs, im sure..
just go through the Rig Packs from the former last Years, you will find a lot of settings in the Comments in RM
of some Commercial Rigs Packs
its not good for me, totally regret it that I have bought it, every M Britt or Tonejunkie Pack is way better and less expensive