Way too bright and very harsh sounding for me. Quite different from your other profiles this time?!
Thanks for the feedback. I usually lean towards darker profiles with a 57 mixed with a ribbon. This time I used a 421 with a high shelf boost at the board. My Atomic CLR that I usually use to monitor took a crap so I’m using a Friedman ASM-12, which is an inherently darker sounding cabinet. Probably overcompensated a little too much.
After some trial and error I'm back again with a couple free profiles of my Wizard MTL. Profiled through a Friedman 4x12 using a 57/421 blend - 1073 preamp - SSL mixer. Both are studio profiles capturing the lead channel - profile 1 has the boost knob on the amp pulled (on) and profile 2 has the boost knob off.
Please help me, help you. Let me know your thoughts. Constructive criticism welcomed and appreciated. Thanks!
Edit - will repost soon. Need to double check the files uploaded.
Webb will you be putting out any new profiles?
soon...hopefully
Hey guys, I've been working on some more profiles of my Wizard MTL, this time through a Mesa 4x12 OS with V30's.
Attached are 3 profiles to try - all using a 57/421 blend. Amp settings are the same in all cases, just small changes in mic placement, levels, and slight eq adjustments on the board. I set up a poll so please give them a try and cast your vote. Feel free to expand on your opinion either here or through a private message.
Thanks!
As with anything, a little research goes a long way before making a big purchase.
If you have a powered head, you should have purchased an unpowered Kab.
Conversely, if you have an unpowered head, you should have purchased a powered Kab. One of the two needs to provide the power. Otherwise, you would need a power amp between the 2.
The Kemper DI is just that...a DI box only. It does not attenuate or load down an amp and therefore needs a speaker cab connected at all times. You would match the ohms to whatever ohms your cabinet is.
- Speaker cable connecting your amps speaker out to “from amplifier”
- Speaker cable connecting Kemper DI “to cabinet” to your guitar cab input
- XLR cable connecting “to profiler input” to the KPA XLR return
Hey! Looks like code doesn't work anymore - your website accepts it without any error and gives 0 discount
Thanks for letting me know. It should be working now.
Black Friday / Cyber Monday flash sale. Save 30% on the Cameron CCV profile pack using code BF30
This is the most bizarre thing I’ve read. Complaining about OPTIONAL, free updates to better an already great product just proves some people can and will find anything to bitch about.
Added 2 new test profiles to the OP. Made a few changes to mic placement and levels. Please share your thoughts. Better overall balance? Clarity?
Thanks!
Let me go back and check the mic levels. I know I added a little more of the Royer into the blend which may be causing some of the bloated low end.
Thanks to all who took the time to comment. Your feedback is valuable. I’m still learning to dial in the amp since there are a lot of tone-shaping options available in addition to bass, mid, treble (gain, saturation, boost, shift, etc). Wizards are known to be very clear and articulate amps even at higher gain settings. The challenge is capturing that magic in the profiles. Stay tuned....
Hey guys,
Just started profiling my Wizard MTL for an upcoming pack and wanted to share a couple samples to get some opinions here before I go any further. Both are studio profiles of the lead channel into a Marshall 1960BX Greenback loaded cab with an SM7b + Royer 121 blend. T1 is with the boost knob engaged and T2 is without.
Feedback would be HUGELY appreciated...either here or via private message if you prefer.
Does it rock?
Does it suck?
My feelings won't be hurt either way. So please - help me help you.
EDIT - added 2 new test profiles. Please download and let me know what you think.
Do you happen to have any raw samples of the profiles like in mono without a mix?
Sure - here is a profile straight in from the Kemper as is.
FYI - Updated CCV pack just released! 16 brand new merged profiles, including some with a new cab - a Bogner 4x12 with Celestion V30's.
Those who previously purchased should have the update link waiting for them in their email box. If you didn't receive, please let me know.
Thanks again for the support!
-ElevenEleven Studios
what are the profiles used for each one of your demos. Thanks Paul
Pretty sure for the main guitars in the Dokken song I used CCV 01 for the left and CCV 02 for the right (double tracked). The clean guitar buried during the chorus was CCV 12 but I can't remember which one I used for the solo. I just opened up the session in Logic to check but I didn't keep notes.
The other 2 demos posted above were sent to me from others who have the pack so not sure exactly which one of the profiles they used.
Appreciate all the support and the positive feedback received so far. Just a quick note that I will have an update to the pack coming out soon with a bunch of merged profiles (free to those that purchased already). Look for an email within the next week. Also, the intro sale price is ending this weekend so if you've been on the fence, now is your chance to grab them.
In the meantime, here is another killer track using these profiles...courtesy of ColdFrixion Thanks again!
On Page 8 of Output menu with Kemper Kone enabled Monitor volume set at maximum -0.0 db. No output. Headphones work -when I plug it back in.
Strange. Mine is super loud at 0 dB. I usually keep my monitor volume around -10 to -12 with the Kab.
Connections are right. Did you try to increase the monitor output volume?
Just bought them and can't wait to give them a go. Thanks Webb!
Thank you!!
Thanks again!
