For all who wants to know the names behind the abbreviations please find enclosed a pdf file

Thank you!!!

Thank you Björn!!

Thank you David!!

Real phantastic profiles!! Thank you so much!! Great job!!

The Dual Amp profiles (Dual Rec/JMP100) from David G Burns are realy phantastic, specially with the new feature adding the double tracker / EQ section.

Turn down the hights from your guitar with the guitar knob add some delay and you are there -- Carlos Santana (depends on your gutar!!).

Thank you very much !!

Muchas gracias / Thx a lot !!

I like very much the free Sinmix IR`s, specially the Mesa ones.

THX A LOT!!!

THX a lot for your effort!!

Muchisimas gracias!! Saludos desde Alemania.

I bought the full package this week. The new ones have a little bit more mids- low end, but still not enough for my personal taste.

What I have done was to change the Cab IR to one from Sinmix /4x12 Mesa / which is free available on his web site. After this it sounds realy good. So in my opinion and for those which are still missing the mid and low ends, the best thing is just to change the cab. The sound coming out from the FRFR Studio speakers reminds me now on the 70/80 Rock. I have not tested it yet through my Bogner 2x12 cab. I will try it once back at the studio.

https://tonejunkiestore.com/free-68-purple-plexi

68 PURPLE PLEXI : I have tried the free profiles and must say it works with my Suhr Modern with humbuckers but not with my Fender Tele or Strat. I am missing the bottom and mid-low end.

For the Suhr I have to tweak on the amp parameters to get a good tone. The free profiles - as given - sound perhaps good for the Sunday morning church, but have nothing to do with Rock, the purpose this amp was build for.

tryhardhack a space parameter for more stereo wide effect would be to use a dual delay in Stomp X (or before the other effects, but after the amp section). Add 30ms to one channel of the mentioned delay and 0ms to the other, No feedback at all for both channels of the delay. All other parameters of this delay at zero, exept stereo wich should be put to 200%. dont use 100, but 98% in the mix, you will hear the difference.

Other delays or reverbs at your choice but afterwards.

Of course this is valid for in Ears, headphones, stereo studio monitors, PA etc, for all devices which can handle a stereo effect.

Take a look under Hays or date from October 19th 2017

xavio dumble Dumble xavio .zip

THX Michael!!!

This has to do with the output section.

Press Output button, go to last page, set all AUX-IN to zero. Thats it.