Hey
so TLDR: anyone know (or could make) some IRs with mics only behind the bass cab?
Why:
I heard it was done for old school Studio One style reggae. I also discovered there's a lot more low end punch with mics behind a guitar cab so it makes a lot of sense. I just don't have a bass amp/cab...
I actually have a low cut on my strat 😉. Two tc's are dumb so I made one after a G&L
Great news!
Tim Pierce has said it's useful to play something dissonant.
Jazzfreak (excellent 5e3 profiles) has talked about playing higher up the neck.
Would be interesting to factor these techniques in & see which make better profiles for certain techniques or contexts
Hey I've had this issue for a while now, and it's pretty recording-ruining. There's an intermittent white noise sound that pops up about every 40-41 seconds (as measured in this recording). My setup is Guitar->front panel In on Kemper->SPDIF->a conversion box (SPDIF to optical)->RME Babyface Pro FS. Please let me know if you've heard of this happening before or have any remedies. Thanks!
edit: just changed RME's clock source setting from Internal to Optical In. maybe that was it?
In this clip, it happens at around 7 seconds, 48 seconds, 1:29
Just wondering if any of you guys have a preset to approximate this. Curious a) to try it and b) to have it in front of a nice tape delay LMK, thanks!
PS it'd be a nice feature request/stock preset (if it isn't already) too!
Paid reviews... very trustworthy.
ok, here's another. fwiw, I'm happy with mine! hope a successor allows multiple profiles in a chain like profiling pedals...
Since Rabea Massad is official endorser of Quad Cortex https://neuraldsp.com/artists/rabea-massaad this video does not make sense here.
I think his feedback is relevant to improvements on a new version of Kemper. And if you watch the section at 1:33, you'll see that he addresses that concern.
It still sounds really good. imo, the effects sound better on Kemper. He mentions they're similar, the Kemper is "woolier" in the low mids and the QC has a certain sponginess in dynamics.
Hm I don't think that answers his question? He's asking for the difference between the two latest 3.2 subversions.
"New Windows driver" is the difference
Not sure if this has been shared but it shows a bit of room for improvement/evolution
Tangerine Dream
This needs adding badly. The tremolo is grossly light on parameters.
I'd love harmonic tremolo & additional controls...
bridge pickup of telecaster/jaguar
Everybody talks about his AC30 but nobody talks about his Deacy germanium amp (modified germanium radio). THAT'S his sound everybody knows and loves.
Sure there's a bit of room for slight improvements but what I'd like to see from CK/Kemper/Virus--and I'd understand if there isn't as much interest in a guitar forum-- is a Kemper of synths: digital modular where you can profile each module. It's all patched digitally, like a Kemper take on VCV rack
Definitely +1
Tks, spotter!
Some kemper profiles or packs?
...search for those amps in Rig Exchange and audition them to find your favorites
The Kemper has a coaxial S/PDIF output. The RME Babyface pro fs an optical input. How you connect a digital coaxial cable with these devices?
With a converter, which I mentioned & has been discussed in this thread.
Hi,
Do I understand you correctly : the kemper works fine with the Konig converters?
Background: I am planning to buy the RME BABYFACE pro fs and I like to use THE SPDIF out of the Kemper. But the Digital Input of the Babyface is different.
So, please let me know, which cable and adaptor / converter I need to have.
Mine works now with previously purchased converters from Amazon. The key was to use digital coaxial cable, not the one that came with the converter.
Thanks again!
Gibson GA-20 V7 By Davec69
he has some great profiles of a Bassman clone and Dumble ODS clone too!
