Kemper Team , please, please allow to switch of the TAP LED !!!
The flashing LED wit a random frequency drives me also crazy !!!
Sorry for being imprecise, I am talking about the Profiler Stage. The TAP LED Brightness setting ist still available in the System Settings, but has no effect.
That flashing runway light was driving me crazy but since I rarely use the tap tempo function (and don't need a flashing LED to assist me when I do) I put a small piece of electrical tape over it. Problem solved.
Kemper Team , please, please allow to switch of the TAP LED !!!
The flashing LED wit a random frequency drives me also crazy !!!
Hi Thomas,
any plans for Marshall JVM410H profiles? I would immediately buy them ....
JVM410H Please ...
+1
Yes, please! Marshall JVM 410H next. The most important amp for me.
Oh yess please, same for me +1000
Hast du dir schon mal die Frfr Boxen von Blueamps angeschaut. Da kannst je 2 als Stereopaar koppeln.
Just curious. Will you be looking into liquifying existing packs? Would be awesome.
I would also be very interested, at least the publication of the tone stack settings of the profiled amps. And I would pay money for the "liquid extension" for profile packs I already have bought.
I would like to still use the TAP button and the Tempo within a rig.
I just want to switch the TAP LED Off or lower the brightness.
This was possible in previous releases, but was changed in 9.x release
Now the TAP Led follows the generic LED brightness
... I mainly would like to switch the LED Off
Stefan
... (as it was before the update" ... and not first select "Babylon ....." and then the Language specific forum.
Stefan
Display MoreThey already answered (as already stated before) here:
What about this frantic TAP tempo LED?
...but guitarists have a memory like a goldfish. What's next? S.t.f.u. maybe?
(Friendly and non philosophical reminders from time to time should be ok, though)
😂😂😂😂😂
Thanks. For the link, I missed this thread.
It would be easy to stop this discussion by Kemper .....
I think everybody would except the answer that it's technically not makable.
At least it would be better than no statement.
Just my two cents.
well, I don't care about Haas-effect and/or compensation.
left site is still plenty louder than right side when playing with engaged widener.
Why don't you just add a soft button to edit the volume of the delayed side? everyone could get happy with very little effort
👍👍👍
The way I do it: In the rehearsal room I increase/decrease the Volume on the Mixer Channel until my ears are saying "Now it's OK"
To experiment with panning maybe also be an option, but I did not try it.
BTW: When you have mono monitor wedges, the double tracker sounds not really good. I use a stereo monitor box. This sounds OK, even it's not real stereo because the speakers are in one box and too close together.
When You are playing live, it's up to the FOH engineer. to balance the stereo channels.
I had a rehearsal yesterday and the man at the mixer confirmed again, that if I use the Double Tracker, one side is always "louder"
or has more gain.
Have a look at this
Double Tracker right Channel quieter?
and especially the post from CK
Ich hab das auch beim Stage, aber mittlerweile wirklich sehr, sehr, sehr selten !
When i use a sound with double tracker (eg TD - Mic Sch from Tribute collection 3) it sounds nice with my studio monitors.
But when i engage my Kabinet (monitor out = master mono) it sounds horrible.
It would be nice if there was an option to bypass the double tracke on mono signals.
oh yessss +1000
