Like you've said, the Kemper Player has no FX Loop. So you can't connect the HX with 4 cable method.
If you want to use FX's from the HX after the Kemper, then you should connect the Output from the Kemper with the Input from the HX and from there to a DI Box or Interface.
Maybe you give it a last try
Good luck.
Or maybe this which is a little bit shorter:
By the way, you are using a Kemper Head / Rack or a Stage?
Hey theplayer
Check this out:
If i'm not wrong, he won't be able to push rigs from his library or make updates if he owns only a tab/smartphone ?!
I think you‘re right. With a tablet / smartphone you can only edit your rigs and not organize them.
You can always ask for his email and mail it to him.
... Gray area ...
Not really for me. Everything works fine.
Did you mute the track in your DAW while recording? And did you activate "Direct Monitor" in the Output Settings of your Kemper?
Said that,
there's no problem if You open a thread where You explain what You did.
I.e.
Starting from This free profile, Ive changed the cab with This one from another profile, then I added this kind of delay with these settings.. and I finally got this profile I find perfect for...
Its another way to share.
I understand. The reason, why I asked this question was, a guy asked for a specific sound. So I thought it would be easier for me to create this sound with an included profile from the rig manager (as a foundation) + the effects and uploaded it into rig exchange. But I don't won't any trouble
That sounds absolutely logical. Thanks for the fast answer
I know that if I buy a rig pack from Michael Britt (or other profile creators), I'm not allowed to share it, which I would do by uploading it to the Rig Exchange. That's not what want to do.
An example:
Let's say I create a special sound with effects from a Michael Britt profile, which is included in the Kemper's rig packs. I would now like to upload this to the Rig Exchange and share it with others.
Am I allowed to do that?
Maybe this video can help you out:
If I need more of that 80's chorus sound I like to combine chorus and pitch shift fx. Also a good amount of delay and reverb and I'm in Heaven ... or Run To You
This ist what the manual says:
The Stack, with its Amplifier and Cabinet modules, is fully compatible, and all types of PROFILEs can be used. The effects in modules A, B, DLY and REV are migrated, if the effect types are available in the Player. Otherwise, modules are set to “Empty”. Exception: Natural Reverb gets replaced by Easy Reverb.
Hi Tanzmucker,
aktuell gibt es ja "nur" 2 Filter, mit denen man die Suche eingrenzen kann. Ich sehe auch nichts, wo man (wie du sagst), noch weiter tiefer filtern kann.
Wenn du Rigs entsprechenden Songs zuordnen willst, kannst du das ja für deine Profile in deiner Lokal Library machen, indem du bspw. am fertig editierten Sound das Feld "Comment", welches im Feld "Rig" steht, nutzt und dort den Song-Namen einträgst. Dieses Feld ist öfter leer oder mit einen Hinweis versehen, wo das Rig ursprünglich herkommt. Kannst du ja einfach überschreiben.
Somit könntest du dir in deinem eigenen Rig-Pool wenigstens schon mal ein System anlegen, womit du nach Songs "filtern" kannst.
Zu der "geheimen Datenbank" --> Wenn ich den Sound eines bestimmten Gitarristen suche, mache ich das gar nicht im Rig Manger, sondern ich frage meistens Google oder Youtube, und finde somit eher einen Anhaltspunkt, was Gitarrist "XY" zu einer bestimmten Zeit für Amps und ggf. auch Effekte genutzt hat. Mit den Infos kannst du dann schon mal gezielter in den Rig Packs oder Rig Exchange nach einem geeigneten Amp suchen.
Was ich dir aber neben dem Rig Exchange noch empfehlen würde, sind die "Kemper Legends Tribute Packs" im Rig Manager. Die wurden alle samt von Thomas Dil erstellt. Der weiß glaub ich, was er macht Und wenn es in Richtung Cover gehen soll, kannst du dir da sicher das ein oder andere raus ziehen - selbst, wenn es bspw. nur FX-Einstellungen sind.
Ich hoffe, das hilft dir ein bisschen weiter.
In the manual you can find this:
Das sagt das Handbuch dazu:
Der Stack mit dem Amplifier und dem Cabinet ist uneingeschränkt kompatibel. Alle Profil-Typen können im Player verwendet werden. Die Effekte in den Modulen A; B; DLY und REV werden übertragen, sofern die Effekttypen im Player unterstützt werden. Andernfalls werden die Module auf „Empty“ gesetzt. Ausnahme: Natural Reverb wird durch Easy Reverb ersetzt.
Morphing Nein.
2 FX Slots vor, und 2 FX Slots nach dem Amp/Cab.
All foot switches are freely assignable to your personal preferences in System Settings in Rig Manager.
But the original Kemper footswitch does not work, right?
That is very strange.. They just could have added that LAN-port somewhere...
Do you mean the remote control with “original Kemper foot switch”? No, it seems like you can't use that.
The Kemper Profiler Switch can be used as an external switch. Here you can assign your preferred switching function to the A and B switches.
According to the instruction manual it says this:
"All foot switches are freely assignable to your personal preferences in System Settings in Rig Manager."
