thanx i give up, it doesnt even come close to a 4x12 cabinet, not even a bit still chasing my sound and this is not it, thanx for ur input
did i metion that it is unpowered head through a powered kemper kone kabinet. one 12 " speaker
you expect one 12" speaker to give you the the same feel as 4x12? ...
remember post #1?
This thread should be for sharing music.
What do you just listening spontaneously. Should be special. No charts. No mainstream.
have you tried to swap left and right xlr cables? can be a cable issue.
( or it´s panoroma, but that´s unlikely as you set it on a per rig basis)
Thanks
But if rig manager isn't the profiles on profiler nor preferences on profiler, then what is the local library ?
as the name suggests, rig manager manages your rigss. you can store and organize more profiles on your computer than in the profiler itself (max 1000).
in your local library ( somewhere on your computer) you can store as many as you like
the profile is mentioned in the first post
Morgan AC20 by rcpacheco profile with a bit of tweaking
it´s a profile many people love here in the forum, it even made it to the factory presets, it´s
2011 More Gain AC20
years ago i had some problems with the remote connection, then i bought a cheap POE (check manual) and never again had any problem.
Also, the remote is much brighter withe the PoE.
I like this relaxed way of playing rhythmic music happily down at a high level.
aii, que saudade do Rio
last time i checked, the brightness control for tap was back in system settings. (Os 10.2)
but it only controls the led on my toaster, not on the remote.
a " include remote" softswitch would be very welcome
Geht auch ohne das Rig extra zu exportieren
Am Rack und am Toaster kannst du ein rig einfach mit den copy und paste Tasten in eine neue Performance einfügen.
Beim Stage geht das so:
Press LONG the Rig button, a copy option appears.
Press copy.
Go to the new slot.
Press LONG the Rig button, a copy/paste option appears.
Press paste.
Save the performance.
manual p.172:
With “Power Sagging” set to 0%, the original dynamic range of the PROFILE is maintained.
When you turn “Power Sagging” beyond 50%, you go beyond what can be achieved with an analog tube amp.
Könnte ein Wackelkontakt im Kabel des Pedals oder im Pedal selbst sein.
Albiful why not? as long as you don´t use any modulation, reverb or compressor it should profile just fine.
Yes, but am looking for acoustic ir, not preamp/channel strips
Dexter and Aura pedals are not only preamps. They are kind of modeling an acoustic signal response from your piezo input to create a more natural sound.
have you checked rm for tone dexter profiles?
aura and fishman will give you some options too.
cant you just back it down 3 db to compensate?
the thing is: if for example you you make a high pass at 80hz, you are also boosting around 80hz +3db
I hope you will find this little video interesting. It shows that High Pass filtering can increase peak levels and reduce sound quality, even if the filter is set below all fundamental freqs of the sound itself.
It comes from Paul Frindle, a guy with 40 years of experience in the pro audio and music industries. He has been part of the development of the SSL E and G-series analog consoles, the Sony Oxford digital mixing console, and many other things.
Can I run a 6ohm power amp into the 4ohm Kemper Cab?
No, you shouldn´t do that!
Using a lower impedance speaker than recommended by the amplifier can lead to increased current draw and overheating, potentially damaging the amplifier. It may also result in distortion, reduced audio quality, and possible shutdown or protection mode activation in the amplifier.
clean smooth tone with an amazing neverending sustain
Clean? The effect is called „Fuzz“
as stated in post#2, room acoustics are a important factor, and the better the mic, the more you´ll notice that.
that´s less important with a ribbon mic like the m160, but you need very good preamps with ribbons (low output)
i also recommend trying to make a stereo recording with the AT4041 AND the Neumann (or whatever mics you want to try).
Acoustic Guitars are so much nicer in Stereo. Don´t go for a "perfect" stereo setup, just point them to where it sounds good.
