Posts by Kellerblues

Quote from Joptunes

You’re a loaded baked potato, with the toppings dripping out

sorry, couldn't resist...

Quote from Ruefus

..I bet they sum them into one channel at the board.

With 100% security

Quote from mtmartin71

Don't know about Wheresthedug but I morph my rig volume for my lead boosts so that wouldn't be a good spot to account for output volume differences in terms of connected devices...for me. Also, I don't think Rig volumes store in Output Presets, do they? I could be wrong.

But it saves per Rig/Performance, opposite to the Monitor out one that is only global

Have you check the output eq/cut settings?

Fait-le pas. Tu vas griller les deux.

Quote from DutchGuitarDude1

This is 80 watts per side tube power?

No, SS. Valvestate emulates the tube response. Had one in a Rack together with a POD X3, Intellifex and BBE. Was using an Engl 2x12 or a Marshall 2x12

Quote from Wheresthedug

Absolutely, not saving the output volumes pretty much renders presets useless for me.

That's what the Rig Volume is there for

Quote from mariosoldano

sorry, i am a Stage User......

Me too

Thx man

UniVibe is in the Phasers list

I could replicate the sound of my Moon Vibe (and then I've sold it).

Settings here

Post

Uni-Vibe Settings

I've tried to match the sound of my Electronic Orange Moon Vibe MkII on the Kemper, and I came VERY close (in a mix non distinguishable, isolated is about 98% there)
I case anybody wants to try it, here are the settings:
Rate 0.94s
Depth 9.1
Manual 6.7
Feedback 0%
Peak Spread +1.7
Stages 2
Mix 88%
Ducking +0.2
Volume +2.2

Edit: Funny thing with this setting is that if you change only Rate and Depth, then it still behaves like the Moon Vibe at equivalent settings, Thinking to link the rate to an exp.…

Kellerblues

Sep 14th 2021

Nice, for me would be a bit too big.

Just one question: while I understand the preference for external drives/fuzz (so many different ones), why the Zoom Multistomp? There is nothing inside it that can't be done (and better) from the Kemper...

Not criticizing, just curious

Quote from mariosoldano

Monitor L + R for the Cabinets and Main Out L + R for the Studio Monitors......where is the problem?????

The Kemper Head has only 1 monitor out, you need to set the direct out to main right if you want to have stereo monitoring. I believe this was the question

Quote from BigFishCombo

If I backup my Kemper and another owner does the same, and we send the backups to each other and install them, have we now essentially swapped Kempers, including performances?

Gb

Correct

Full release with LP. Go for it

Quote from hafi19

Two great guitarists with Billie Jean.

External Content www.youtube.com

Content embedded from external sources will not be displayed without your consent.

Display all external content

Through the activation of external content, you agree that personal data may be transferred to third party platforms. We have provided more information on this in our privacy policy.

Great! I was hearing yesterday at this guy that do that on 1 guitar....

This is definitely a level that is out of my range...

only if you want the Cab profiled as well. In your case should be better to use the send and make a direct profile

Quote from vjclaus

for me the mbritt profiles work best for live playing with real musicians, but not for playing alone at home or recording.

To my disapointment, yesterday i bought tonejunkie slash inspired profiles, sounds awesome at home, but get lost in the mix in band situation, very frustrating.😫 sounded weak, thin linear with no balls. Mbritt profiles sound at home a little bit dull, but in live Situation with higher volume great. I haven't found a solution to tweak profiles for recording to work in live Situation 😢😫

In many rigs I have saved a treble booster in front and a studio eq in x (mid boost/high cut). This together with with some morph of the amp parameters allows me to adjust on the fly for different playing situations/volumes and for different guitars as well. I honestly use the same rigs in studio, live or at home and they works outstanding for 95% of the situation. For the remaining 5% I build dedicated rigs

you can also use the Send to profile the preamp only

I've just deactivated the sleep modus. Computer stays on only when I'm doing something, same for the Kemper

Quote from guitarchiq

I was searching for whether it was possible and came across this thread. Did this ever happen or is it still not a thing?

I found two profiles that I liked and wanted to just blend the two.

You need 2 kempers