Posts by Michael_dk

Quote from GCNC8068

But unclear now what the gain knob is doing in a regular profile vs in a LP. It seems to me in a LP the gain is modeling what the gain in the profiled amp would do (ie, in HW’s vid he explains that for a fender dlx reverb you’d never get a above about 5.5 on the gain because that’s all the amp has). So what are we hearing in a standard profile deluxe when you crank the gain the 8?

My guess: this would be the same thing as we get today if we profile the reference amp at its max gain and then turn the gain on the kemper profile up from there.

I think you make some very good points, Armin.

I definitely like the liquid profiles capability, and will likely prefer this. Haven't tested it yet. But there is the potential downside that suddenly it will depend on MY ability to dial in great tones, and not leveraging the abilities of the profile creators (there are obviously upsides as well). On the flip side, I've often run into the "this profile ALSO sounds good", leading to a lot of profiles on the kemper, more than realistically needed. I think liquid profiles will shift my mentality in a good way towards using the onboard controls more instead.

To the extent that profile creators use different mics, cabs and placements tailored to the different sweet spots of the amp - that is also something we lose.

Quote from Kellerblues

Profiling process has not changed (as stated by Kemper team) and therefore there should be no difference as far as you know the original amp settings.

...But from what I read, the manual advises a specific way of capturing the profiles (EQs at noon, gain at max). I would think that there IS some difference based on this.

There's no "profiling with the liquid method". It's done after the profiling process. You just need to know the original reference amp settings used for profiling.

Quote from Amcolan

Will updating to beta effects my current saved performances? I want to try it out but don’t want to mess up my live performances for upcoming shows

If you have upcoming shows - wait a while maybe

Even if it shouldn't affect your performances, there are no guarantees; especially for a beta version.

I think at this point it's probably a matter of when they feel assured that the latest beta is solid and stable so people can reliably downgrade in case of issues with version 10.

Quote from b_ryan

.is it possible to adjust volume on the S/Pdif out

You don’t adjust volume on a spdif signal

Awesome! Takes me back to the days when I was heavily (ha ha) into Doom Metal. Nice growl on the vocals, by the way - reminds me of Saturnus

Quote from thebrushwithin

My forum link is really screwed up, the posts are in English, but everything else is in German. I've been with support about this, and so far they say they can't duplicate the problem. It's like that on every device I have, iPhone, IOS, MacOS and Windows. They told me to go to the upper right hand corner and select "Sprache", but there is no such option anywhere that I can find. When I enter the main site, it has United States checked, but the forum is the way I described it, and I have clicked on every pull down menu option, and there's still no way to correct it.

Post

RE: all re in dutch.... i don't anderstand

Click your avatar in the top right menu -> click the gearwheel ("Einstellungen und Privatsphäre") -> select English from the first drop-down menu ("Sprache") -> click the button "Absenden" at the bottom of the page.

Michael_dk

Jul 24th 2023

Click your avatar in the top right menu -> click the gearwheel ("Einstellungen und Privatsphäre") -> select English from the first drop-down menu ("Sprache") -> click the button "Absenden" at the bottom of the page.

Quote from Monkey_Man

Interesting:

I was just informed via PM that I've been relegated to "Beginner" status.

Wassup wit' dat?

Provided that everything works "flawlessly", it would seem like you'd only need the one, barring the cabs and mics and mic placement etc.

As Wheresthedug points out, different amps may sound different. I imagine that - realistically - this is sometimes very true, and a lot of the times the differences are minimal. This is pure guesswork on my part.

Another reason for having different profiles could be if they are profiled with different pedals, especially those not already in the profiler as effects. Outboard gear such as preamps may also play a part.

I think that's all I can think of

As I said - provided everything around liquid profiles works as intended, it would severely limit the need for multiple profiles of the amps where the tone stack has been modeled by kemper.

Quote from christianbad

Michael_dk regarding latency

there´s a detailed examination about this here:

Thread

extra latency using SPDIF

Hi

I have just got a (used) Kemper and I am happy with it !
I have a question about recording from SPDIF versus analog output.

I have simultaneously recorded the same signal ('Master stereo') from both outputs (SPDIF Out and Main Out) with the same USB audio interface (NI Komplete Audio 6). The track recorded from the SPDIF output is 3.5ms later than the track recorded from the analog output. Do you know where this extra latency comes from? the Kemper? my recording system? Do you experience the…

Emmanuel

Feb 4th 2018

Yup - I'm the second poster in that thread

Quote from musicmad

Yeah. My suggestion is to accomplish that part in the analog domain. Having the Kemper analog outputs connected to the RME.

That was my first thought - but wouldn't that introduce latency in the sense that what is being monitored is slightly delayed compared to what is being recorded? Since the recorded signal wouldn't go through the DA conversion.

Maybe worth a shot to see how it works out in practice.

Quote from Wheresthedug

As musicmad said, it is really easy to create an aggregate interface in Mac and have both simply show up in Lpgic as inputs and outputs. You just need to select which one you want on a track by track basis. Nothing complicated at all.

I think the issue is that he wants to monitor his playing on the kemper using the outputs of the other audio interface without using daw (track) monitoring.

Quote from b_ryan

Why can't the Kempers USB signal reach my audio interface?

...Because they are not connected directly...?

There's a computer in between, right?

So the signal from the Kemper reaches the computer. How can the kemper decide what the computer does with the audio from that point?

Just be aware that the kemper does not include phantom power, so only dynamic mics can be used for this (or mics with their own power supply)

Quote from Kellerblues

Monitor out is not balanced

If I had thought for a second I might have realized that - thank you for the correction

Quote from Kellerblues

No need to use a speaker cable for a powered Kabinet, instrument cable is the correct one. Unless you have a Powered Kemper and a Passive Kabinet

Shouldn't it be a balanced cable?