have you tried to swap left and right xlr cables? can be a cable issue.
( or it´s panoroma, but that´s unlikely as you set it on a per rig basis)
Did you test it with Stereo effects or did you send the same mono signal out to left and right?
Where do your main outs go? FOH, Monitors, or into an interface?
Hi . I have noticed difference of volumes right and left channels main outputs via XLR in my Kemper stage. I didn't find any adjustments in output section to correct this difference . The difference is about 5dB .. Using headphones everything is ok .
Could anybody please let me know if is adjustable, and if so - where to find this set up.
If not ... maybe is simply broken ?
Many thanks in advance .
Robert
What are you running the L/R xlr's into? When you say "The difference is about 5dB", where do you meter it? It could be the problem is the gain pots on the board/ interface. Does this happen for all profiles? Check each channel one at a time and set the gain to -18db on the meter for each channel and the see if all channels are set the same on the gain pots.
One way to adjust is raise the gain on the channel that is lower or lower the gain on the one that is louder. I'm talking about the gain setting on the mixing board or interface the Kemper is plugged into. Don't link the 2 channels together or you won't be able to control separate gain settings.
But if the cause of the imbalance is due to an internal setting on the Kemper, the problem should be corrected there first and the above would not need apply.
I have about a 6db difference between sides too. Have done for as long as can remember. My first thought was panorama setting but its at 0 so I just up the gain on one side on the desk/interface.
Mine has always been like that. The arsey soundies will give you earache about it but the Real (World) ones will do something like this ….
