I just plugged my Toaster in for the first time in a week. Worked fine at last Saturdays gig. No Input Tuner/ rigs have no input. Guitar and cord work good. HELP!!! Iupdated to 2.0 but still the same thing. HELP!!! in 14 months of use never a problem. Please any sugestions
Input DEAD
- whippinpost91850
- Closed
-
Have you by accident changed the input to SPDIF?
-
With nothing plugged into the input the tuner bubble jumps all over
-
I had a bug where the KPA detected a volume pedal while there was no one plugged in -> silence. I had to reset pedal configuration (just set Pedal 1 and 2 to some values and then back) to get it working again.
Also, try a system reset (hold system while booting). -
With nothing plugged into the input the tuner bubble jumps all over
This is normal and has nothing to do with your input problem. Don't worry about that. -
Just sayin:
I once plugged in the headphone out...
Took 5 minutes and a reboot to realize my error... -
I freaked out once because I had a loop enabled in a preset, but didn't have any pedals in the loop. Thought my unit had gone belly up for about 10 minutes...
-
[Blocked Image: http://www.freesmileys.org/smileys/smiley-laughing025.gif]haha, ingolf. i am not the only one! a student of mine (13 years) asked me while i was helplessly trying all the cables i have:
"maybe you try the other input?" hilarious. well, usually the input IS on the left side, isnt it? so check this also.
-
Just sayin:
I once plugged in the headphone out...
Took 5 minutes and a reboot to realize my error...[Blocked Image: http://www.freesmileys.org/smileys/smiley-laughing025.gif]haha, ingolf. i am not the only one! a student of mine (13 years) asked me while i was helplessly trying all the cables i have:
"maybe you try the other input?" hilarious. well, usually the input IS on the left side, isnt it? so check this also.
Well, this makes 3! Happened to me also - guitar goes to the right side
Took me more than 5 minutes to figure it out -
Just sayin:
I once plugged in the headphone out...
Took 5 minutes and a reboot to realize my error...Ingoff, You know I ws pretty distracted yesterday and may have been just stupid enough to not realize the error. I'll try when I get home. Thanks for the heads up on an easily done mistake. Paul
-
Happened to me more than once...
-
I'M SO GLAD IT'S NOT JUST ME
-
At least you plug it in somewhere... sometimes I'm wondering why my guitar doesn't "work" till I realise I didn't even put a cable in it ._.
-
Ingoff, thanks for helping me prove I'm just an Idiot !!!!!!! I indeed as you said you had done plugged the guitar into the phones jack and the phones into the guitar input. I guess it's just so natural to plug the guitar into the left side of the amp.
Haha, indeed!
I consider this the ONLY design flaw in the KPA to have the input on the right.
Glad you're sorted! -
Thanks, I'll try not to make this error again Yes this is a rather odd design flaw
-
Thanks, I'll try not to make this error again Yes this is a rather odd design flaw
Nope, it will happen again! I happened yesterday at the band room. The guys were waiting... I've heard one say don't give midi stuff to guitar folks
-
Guys it feels so good to know that I am not the only one! ;-)) thanks!!
-
At least we know it's a "world-wide" error
Tuner/ rigs have no input. Guitar and cord work good. HELP!!! Iupdated to 2.0 but still the same thing. HELP!!! in 14 months of use never a problem. Please any sugestions
