Kemper Stage crashes every time

  • This has been happening for the past month—

    Every time i use the Stage, after some brief period of time (5-10 minutes?) it crashes. Sound stops, and at first the screen is normal, but then the screen goes to the KEMPER PROFILER readout, but then it hangs and doesn't reboot itself. I have to unplug, replug and that corrects the problem, until the next time. Today, it happened after just two minutes.


    I didn't do anything. I was just playing a simple profile, not tweaking, not footswitching, nothing. Just playing. That's the same experience each time it crashes—not due to my interacting with the Stage or the editor.


    I'm running RM 3.4.57 and firmware is current, 8.7.10.38833

  • Contact Support with the Error Code on the display. It might just be a corrupt profile (file) and takes a minute or so for you to fix.

    Larry Mar @ Lonegun Studios. Neither one famous yet.

  • have you tried all of these? it works for my rack,,

    https://www.soundside.de/suppo…4MS5n3qMFeiz3hXjZULlf0dhM

    esp, this part,,,,

    KPA does not start anymore

    There are different reasons why the KPA may not start anymore.

    The most common thing is a corrupt rig e.g. after downloading a corrupt file


    To reset the last used (corrupt) rig do like this:


    • Switch the main knob to off
    • wait a few seconds
    • hold the 'Rig' key
    • while still holding the 'Rig' key - switch KPA to tuner

    If the above did not help:

    There are other keys to reset other parts of the KPA memory.

    To reset the (corrupt) Midi settings do like this:


    • Switch the main knob to off
    • wait a few seconds
    • hold the 'Quick' key
    • while still holding the 'Quick' key - switch KPA to tuner

    To reset the (corrupt) System settings do like this:

    (Note: All your system settings will be erased - but not your rigs)

    • Switch the main knob to off
    • wait a few seconds
    • hold the 'System' key
    • while still holding the 'System' key - switch KPA to tuner

    If the three options above did not help your KPA back to live, you may have a completly corrupted rig library or even the firmware may be corruped

    Check the sections below to recover from this.