Problem with Kemper hooked up via usb

  • My Kemper rack is hooked up to a Mac mini M2 pro via USB

    1st problem: I only get sound from the Kemper with Logic Pro X open and an armed track with input monitoring on.

    2nd problem: If I open rig manager then I get terrible noise and latency.


    How can I hear the Kemper without having my Daw open?

    How can I edit in Rig Manager with the Daw open?

  • Direct Monitoring is turned ON. And has always been turned on.

    Problem is the same.

    I ONLY get sound from Kemper when Logic Pro X is open and input monitoring is activated on an armed track. Otherwise no sound from Kemper. Maybe I should go back to hooking up the Kemper via SPDIF?

    The way it is now via USB impossible to edit in Rig Manager. Crackling and Latency..And no sound without input monitoring in Logic enabled.

    Audio Interface is Audient Evo 16.

  • to use the Profiler as an audio interface with zero latency monitoring you should connect your speakers to the Profiler or use the headphones output of the Profiler to monitor the guitar signal and the DAW signal.

    If you use a second interface as the output device you need to activate software monitoring in your DAW to forward the incoming audio to the outputs of your Audient interface. This adds latency to the signal that is determined by the buffer size in the Logic audio settings.

  • I am in my recording studio where I play through my studio monitors. I will not use headphones just to hear the Kemper neither do I want to hook up the studio monitors to the Kemper as they are hooked up to a monitor controller.

    As mentionned in my initial post, software monitoring is activated in Logic as it is the only way to hear the Kemper at this point.

    But when doing so when opening Rig Manager, the signal distorts and crackles which makes editing in Rig Manager impossible.

    So I guess the USB option and the way it is designed is not for me then.

    Too many (for me) unconvenient changes necessary.

    Never had any similar issues before when I was using SPDIF/Coax connection with the Kemper. Will therefore go back to SPDIF and add the additional cabling.

  • Yes, I would definitely say you need a dedicated audio interface in a studio unless you only record electric guitars with magnetic pickups. A guitar processor interface will always have limited use, which is why I think they resisted building one for a while.


    You might want to record a professional mic at some point.